Requirements Roots blower is directly connected blower intake transport medium temperature not higher than 40 ℃, impurity content of the medium particles no larger than 1000mg / m3, the maximum size of the particles should be 0,1mm below. When using large high-pressure blower boost, shall not exceed the nominal value of the high-pressure water-cooled Roots blower boost the blower under the nameplate, as Roots blower special structure, so the operation requires many differences with other fans, Care must be taken. Complete intensive type blower mainly by the host, auxiliary equipment, motor three parts. Roots blower host structure is as follows: Roots blower dense sets supporting the host structure for the horizontal. Two impeller axis plane parallel to the ground determined, the upper end of the intake port in the housing, the drive wheel from the pulley (or coupling) end, the counterclockwise rotation Roots blower, the gas sucked on the left since the upper end (or lower end ) discharge, the blower motor by a belt (or couplings) drive, and mounted on the same base. High-pressure water-cooled Roots blower Roots blower _ _ Zhucheng East Machinery Co., Ltd. is provided by John Han Machinery Co., Ltd. Zhucheng East. Zhucheng East Han Machinery Co., Ltd. (www.dhlcfj.com) (www.dhlcfj.com) strong, credible, Shandong Weifang fan, ventilation equipment industry has accumulated a large number of loyal customers. The company better work attitude and constantly improving innovative ideas will lead the East Han Machinery Co., Ltd. Zhucheng and you hand into the brilliant, for a better future! You can also access (www.dhlcfj.com/supply_details_38111745.html), for more information about the company.